Almexa

Flat-rolled aluminum products

Aluminum circles for cookware

Aluminum circles blanked at the plant from our own coil, for deep drawing and spinning. Diameters from 6.30 to 47.24 in (160 to 1,200 mm) and gauges from 0.0220 to 0.148 in (0.56 to 3.76 mm), in mill finish.

An aluminum circle, or disc, is a flat round piece blanked from rolled coil, with the diameter and gauge required by the drawing die of a pot, a pan, a steamer or a lighting fixture body.

Aluminum circles stacked on a pallet at the Almexa plant
Quote this product

Specifications

Aluminum circles: manufacturing ranges
ParameterRange
Alloys1050, 1100, 3003, 3004, 3104, 3105; 5005, 5052, 5754
Thickness0.0220 to 0.148 in (0.56 to 3.76 mm)
Diameter6.30 to 47.24 in (160 to 1,200 mm); 5000 series up to 36 in (914 mm)
TempersO for deep drawing; H1X, H2X or H3X by alloy and part
FinishMill finish; non-stick or paint on request
Lot certificationMill test report with chemistry and mechanical properties
FlatnessPer The Aluminum Association standard; special flatness is validated with your sales rep
Packaging25 kg (55 lb) bundles for shipments within Mexico or export-type pallets up to 800 kg (1,764 lb)

Values from Almexa's September 2026 technical data sheet, per Aluminum Association standards. Every quote confirms the exact range for your alloy and temper.

Aluminum circles per metric ton

Theoretical number of circles in one metric ton (1,000 kg, 2,204.6 lb) at 2.71 g/cm³. Use it to turn your consumption in pieces into tons, which is how circles are quoted.

Aluminum circles per metric ton by diameter and thickness (theoretical)
Diameter0.032 in (0.81 mm)0.040 in (1.02 mm)0.063 in (1.60 mm)0.080 in (2.03 mm)0.125 in (3.17 mm)
8 in (203 mm)14,00011,2007,1105,6003,580
10 in (254 mm)8,9607,1704,5503,5802,290
12 in (305 mm)6,2204,9803,1602,4901,590
14 in (356 mm)4,5703,6602,3201,8301,170
16 in (406 mm)3,5002,8001,7801,400900
20 in (508 mm)2,2401,7901,140900570

Aluminum circles by use: alloy, temper and gauge

Aluminum circles for cookware by use (reference; the sales executive confirms it with your part)
UseAlloyTemperReference thickness
Pots, saucepans and pans, deep drawn or spun1050 or 1100O (annealed)0.06 to 0.148 in (1.5 to 3.76 mm) by diameter
Thick bases and large steamers that need more rigidity3004 or 3105O (annealed)0.06 to 0.148 in (1.5 to 3.76 mm) by diameter
Base that warps in useMore thickness, or move from 1100 to 3004Reviewed with your dieDepends on the part

Alloy pages

Aluminio TIMESA aluminum steamer pot

Case study

“Excellent service, quality and price. Deliveries on time and as agreed.”

C.P. Humberto Tinoco, CEO of Aluminio TIMESA (translated from Spanish)

TIMESA makes pots and steamers in Mexico City with Almexa 1100-O circles: 40 to 50 metric tons a month, for 30 years now.

See the case study

What it is used for

  • Pressure cookers, pots and steamers
  • Non-stick pans and griddles
  • Professional foodservice line
  • Grills, griddles and molds
  • Lamp bodies and reflectors

Industries that use it: Cookware.

Application guides: Circles for pots and pans.

What we need to quote

  1. Circle diameter and thickness
  2. Alloy and temper, or the part you will draw
  3. Surface finish and the coating you will apply
  4. Pieces per month
  5. Whether the circle has food contact

The sales executive confirms the delivery date in the quote, per plant schedule.

How buying works

  1. Send your spec through the form or book a call with sales.
  2. Within 24 hours we tell you whether it is feasible (up to 72 if it needs plant analysis).
  3. You get price per metric ton, minimum order and delivery date based on the plant schedule.
  4. Your material ships with a mill test report per lot.

Quote this product

Why buy them from the mill

The circle inherits the coil's properties: if a pan base warps or a draw tears, the cause is alloy, temper or metal cleanliness. By controlling the furnace, Almexa controls all three.

Cookware makers in Mexico and the US get documented Mexican origin for USMCA and a supplier a truck ride away, not an ocean.

Applicable quality systems

  • ISO 9001
  • Mill test report per lot

See certifications · Aluminum origin

Frequently asked questions

What is the minimum order for aluminum circles?

It depends on the diameter and gauge of each size, because each run uses the full length and width of the coil. As a starting point for the total order: 10 metric tons in central Mexico and 20 metric tons, one container, elsewhere in Mexico (Almexa management, November 2026). State diameters, gauge and volume per size and the sales executive confirms the lot, including for export.

Which aluminum alloy is best for deep drawing cookware?

1050 or 1100 in O temper, the most ductile condition: it stretches without tearing. When the part needs more rigidity, such as thick bases or large steamers, use 3004 or 3105. Thickness runs from 0.06 to 0.148 in (1.5 to 3.76 mm) depending on diameter and part. Almexa makes circles in these alloys from 6.30 to 47.24 in (160 to 1,200 mm) in diameter.

Which aluminum alloy is used for pots and pans?

For deep drawing and spinning, 1050 or 1100 in O temper: maximum ductility. For parts that need more rigidity, such as thick bases or large steamers, 3004 or 3105. Thickness runs from 0.06 to 0.148 in depending on the part.

Why does an aluminum pan base warp?

Insufficient thickness for the diameter, an alloy too soft for the use, or residual stress from rolling. The fix is usually more gauge or moving from 1100 to 3004; the sales executive reviews it with your die.

Are Almexa circles suitable for food contact?

Yes, 1000 and 3000 series aluminum is used in cookware. State in the quote that the part will have food contact and which coating you will apply, and the sales executive confirms alloy, finish and the current quality documentation.

How are aluminum circles packaged?

For shipments within Mexico, in 25 kg (55 lb) bundles. For export, on export-type pallets up to 800 kg (1,764 lb).

Send diameter, gauge and pieces per month. We quote from the plant.

Request a quote