Almexa

Flat-rolled aluminum products

Aluminum coil from a Mexican mill

Cold-rolled aluminum coil made in Mexico from the furnace. Gauges from 0.0177 to 0.148 in (0.45 to 3.76 mm), widths from 6.30 to 48 in (160 to 1,219 mm) and alloys in the 1000, 3000 and 5000 series, in the temper your process needs, with a mill test report per lot.

Aluminum coil is cold-rolled aluminum wound on a core, ready to feed stamping, forming, cut-to-length or coil-coating lines.

Finished aluminum coils at the Almexa plant
Quote this product

Specifications

Aluminum coil: manufacturing ranges
ParameterRange
Alloys1050, 1100, 1350, 3003, 3004, 3104, 3105; 5005, 5052, 5754
Thickness0.0177 to 0.148 in (0.45 to 3.76 mm); 5000 series from 0.0197 in (0.50 mm)
Width6.30 to 48 in (160 to 1,219 mm); 5000 series up to 36 in (914 mm)
Inside diameter20 in (508 mm)
Outside diameter39 to 46 in (990.6 to 1,168 mm)
Tempers1000 series: O, H12, H14, H16 and H18; 3003 and 3105: O, H1X and H2X; 3004 and 5000 series: O, H32, H34 and H36
FinishMill finish
Lot certificationMill test report with chemistry and mechanical properties
FlatnessPer The Aluminum Association standard; special flatness is validated with your sales rep
PackagingExport-type pallet, eye to sky (vertical) or eye horizontal

Values from Almexa's September 2026 technical data sheet, per Aluminum Association standards. Every quote confirms the exact range for your alloy and temper.

What it is used for

  • Stamping and blanking of automotive and industrial parts
  • Truck bodies and lightweight transport structures
  • Cut-to-length sheet for construction, signage and furniture
  • Slitting into strip, sheeting, circles and blanks
  • Industrial thermal insulation and ductwork

Industries that use it: Automotive and transportation, Construction, Service centers and re-rollers.

Application guides: Heat shields, Facades, Roofing and gutters.

What we need to quote

  1. Alloy and temper, or the end use if you are not sure
  2. Thickness and tolerance
  3. Width and core inside diameter
  4. Monthly or per-order volume, in metric tons
  5. Certifications your customer requires (PPAP, others)

The sales executive confirms the delivery date in the quote, per plant schedule.

Quote this product

Why buy it from the mill

A service center slits and resells coil it bought from someone else; the mill makes it. That means alloy and temper are set to your spec, the origin of the metal is documented from the furnace, and a quality issue is answered by the people who rolled the coil.

Almexa direct-chill casts and hot rolls, the process that gives better mechanical properties than continuous casting in the alloys that need it.

Applicable quality systems

  • ISO 9001
  • Mill test report per lot

See certifications · Aluminum origin

Frequently asked questions

What is the difference between 1100 and 3105 aluminum coil?

1100 is 99% pure aluminum: very ductile, excellent for forming and corrosion resistance, with low strength. 3105 carries manganese and some magnesium: stronger and stiffer, used in construction and parts that need rigidity.

What is the maximum coil width Almexa makes?

48 in (1,219 mm) in the 1000 and 3000 series, and 36 in (914 mm) in the 5000 series (5005, 5052 and 5754), per Almexa's September 2026 fact sheet.

What is the thinnest coil Almexa makes?

Today 0.0177 in (0.45 mm), or 0.0197 in (0.50 mm) in the 5000 series. The equipment being installed at the plant will allow 0.0118 in (0.3 mm) by the end of 2027.

What is the minimum order for aluminum coil?

As a starting point, 10 metric tons for delivery in central Mexico and 20 metric tons, one container, elsewhere in Mexico (Almexa management, November 2026). The final minimum depends on size, gauge and alloy, and export orders are confirmed in the quote. State your volume and the sales executive confirms whether it works or how to supply a small volume better, for example with strip slit to your width.

Does the coil ship with a mill test report?

Yes. Every lot ships with a certificate of chemistry and mechanical properties, plus origin documentation for your customer or customs broker.

Which tempers does Almexa make in each alloy?

1050, 1100 and 1350: O, H12, H14, H16 and H18. 3003 and 3105: O, H1X and H2X. 3004, 5005, 5052 and 5754: O, H32, H34 and H36. Properties for each temper follow The Aluminum Association standard and are shown on each lot's mill test report.

How is aluminum coil packaged?

On an export-type pallet, eye to sky (vertical) or eye horizontal, depending on how you unload it and mount it on your line. Inside diameter is 20 in (508 mm). Tell us your preference in the quote request.

Send alloy, gauge, width and tons. We quote from the plant.

Request a quote