Aluminum sheet and plate
Aluminum sheets cut to length from coil made at Almexa, 0.0197 to 0.148 in (0.5 to 3.76 mm) thick, up to 48 in (1,219 mm) wide and 12 ft (3,657.6 mm) long, with no uncoiling or leveling on your side. For heavier gauges we also make plate, from 0.157 to 13 in (4 to 330 mm).
Cut-to-length aluminum sheet is cold-rolled coil cut into flat sheets of defined length and width, ready to stamp, bend, weld or paint without an uncoiling line.

Specifications
| Parameter | Range |
|---|---|
| Alloys | 1050, 1100, 3003, 3004, 3104, 3105; 5005, 5052, 5754 |
| Thickness | 0.0197 to 0.148 in (0.5 to 3.76 mm) |
| Width | 11.97 to 48 in (304 to 1,219 mm); 5000 series up to 36 in (914 mm) |
| Length | 24 to 144 in, 12 ft (610 to 3,657.6 mm); over 120 in (10 ft), confirmed in the quote |
| Tempers | 1000 series: O, H12, H14, H16 and H18; 3003 and 3105: O, H1X and H2X; 3004 and 5000 series: O, H32, H34 and H36 |
| Plate | 0.157 to 13 in (4 to 330 mm) |
| Lot certification | Mill test report with chemistry and mechanical properties |
| Flatness | Per The Aluminum Association standard; special flatness is validated with your sales rep |
Values from Almexa's September 2026 technical data sheet, per Aluminum Association standards. Every quote confirms the exact range for your alloy and temper.
Aluminum sheet weight per sheet
| Thickness | lb/ft² (kg/m²) | 48 × 96 in sheet, lb (kg) | 48 × 120 in sheet, lb (kg) |
|---|---|---|---|
| 0.020 in (0.51 mm) | 0.282 (1.38) | 9.0 (4.1) | 11.3 (5.1) |
| 0.032 in (0.81 mm) | 0.451 (2.20) | 14.4 (6.5) | 18.0 (8.2) |
| 0.040 in (1.02 mm) | 0.564 (2.75) | 18.0 (8.2) | 22.6 (10.2) |
| 0.063 in (1.60 mm) | 0.888 (4.34) | 28.4 (12.9) | 35.5 (16.1) |
| 0.080 in (2.03 mm) | 1.128 (5.51) | 36.1 (16.4) | 45.1 (20.5) |
| 0.125 in (3.17 mm) | 1.762 (8.60) | 56.4 (25.6) | 70.5 (32.0) |
| 0.148 in (3.76 mm) | 2.087 (10.19) | 66.8 (30.3) | 83.5 (37.9) |
- Aluminum sheet gauge chart in inches and mm, aluminum and steel
- Aluminum weight calculator full chart, coil and circle weight
- Aluminum sheet weight calculator pounds per sheet and sheets per ton for 4 x 8 and 4 x 10 sheets
- Aluminum gauge converter if your order comes in gauges
Alloy pages
What it is used for
- Truck bodies, boxes and transport structures
- Facades, ceilings, gutters and roofing
- Signage, furniture and decoration
- Appliance housings and lighting fixtures
- License plates and identification plates
Industries that use it: Automotive and transportation, Construction.
Application guides: Trays and molds, Facades, Roofing and gutters.
What we need to quote
- Alloy and temper, or the end use
- Thickness, width and length
- Number of sheets or metric tons
- Flatness and surface finish your process requires
- Packaging: pallet, interleaving, protection
The sales executive confirms the delivery date in the quote, per plant schedule.
How buying works
- Send your spec through the form or book a call with sales.
- Within 24 hours we tell you whether it is feasible (up to 72 if it needs plant analysis).
- You get price per metric ton, minimum order and delivery date based on the plant schedule.
- Your material ships with a mill test report per lot.
Why buy it from the mill
The sheet comes from the same coil we make, so traceability is unbroken: the lot's mill test report travels with your sheets.
If you buy sheet from a distributor today, ask which mill it came from. If they don't know, neither will your customer.
Frequently asked questions
What is the minimum order for aluminum sheet?
As a starting point, 10 metric tons for delivery in central Mexico and 20 metric tons, one container, elsewhere in Mexico (Almexa management, November 2026). The final minimum depends on size, gauge and alloy, and is confirmed in the quote, including for export.
What gauge of aluminum sheet do I need?
It depends on the part. We make sheet from 0.0197 to 0.148 in (0.5 to 3.76 mm): truck bodies and structures use 0.040 to 0.118 in (1.0 to 3.0 mm); plates and signage, 0.040 to 0.059 in (1.0 to 1.5 mm). For gauges under 0.0197 in (0.5 mm), coil or strip from 0.0177 in (0.45 mm) is the better fit. The gauge guide on the blog has the table in inches and millimeters.
Does Almexa sell sheet by the piece or by the ton?
Quotes are per metric ton, although the order is specified in sheets. State size and quantity and the sales executive converts to weight with the same formula as the site's calculator.
Does Almexa make heavy aluminum plate?
Yes. For gauges above 0.157 in (4 mm) we make plate from 0.157 to 13 in (4 to 330 mm), direct-chill cast. State alloy, dimensions and quantity in the quote and the sales executive confirms the date based on the plant schedule.
What length and flatness does the sheet have?
Sheet is cut from 24 to 144 in (610 to 3,657.6 mm, 2 to 12 ft) long; over 120 in (10 ft) is confirmed in the quote. Flatness meets The Aluminum Association standard; if your part needs special flatness, it is validated with your sales rep before quoting.
Buying guides
- Aluminum sheet gauge chart: inches, millimeters and how it differs from steel gauge
- Aluminum vs. galvanized steel: when to use each and what the equivalent part weighs
- Aluminum temper designations: O, H14 vs H24, H32 and which to order
- What aluminum alloy numbers mean (1100, 3003, 3105, 5052)
- 5000 series aluminum: 5005 vs 5052 vs 5754, how they differ and which to order
- How to tell if aluminum is good quality before you buy it
- How to read an aluminum mill test report (MTR) for sheet, coil and circles
- Midwest aluminum premium and regional premiums: what they are, where they stand and what they add to your price
- How to specify and buy aluminum sheet and coil: a guide from spec to receiving
- How to ship aluminum coil, sheet and circles without damage: trucking, securement and water stains
- 10 things to know before shipping or receiving aluminum by ocean container
Other products from the mill
- Aluminum coil0.0177 to 0.148 in · 6.30 to 48 in · 1000, 3000 and 5000 series
- Aluminum circles6.30 to 47.24 in dia. · 0.0220 to 0.148 in · 1000, 3000 and 5000 series
- Aluminum blanksCustom shape · 0.0177 to 0.148 in · 1000, 3000 and 5000 series
- Aluminum stripNarrow coil to your width · 0.0177 to 0.148 in · 1000, 3000 and 5000 series
- Aluminum hot bandAbout 0.31 in (8 mm) · F temper · 30.7 to 49.2 in · coils up to 6,834 lb
Send size, gauge and quantity. We quote from the plant.
Request a quote