Aluminum strip slit to your width
Aluminum coil slit narrow on our slitting lines, to the width your roll former or press runs. It is the mill's newest product line.
Aluminum strip, also called slit coil, is a narrow coil made by slitting a wide coil lengthwise. It feeds roll formers, progressive dies and automatic lines.

Specifications
| Parameter | Range |
|---|---|
| Alloys | 1050, 1100, 1350, 3003, 3004, 3104, 3105; 5005, 5052, 5754 |
| Thickness | 0.0177 to 0.148 in (0.45 to 3.76 mm); 5000 series from 0.0197 in (0.50 mm) |
| Width | To your size, slit from coil up to 48 in (1,219 mm) wide (5000 series: 36 in, 914 mm); the minimum depends on gauge |
| Inside diameter | 20 in (508 mm) |
| Tempers | 1000 series: O, H12, H14, H16 and H18; 3003 and 3105: O, H1X and H2X; 3004 and 5000 series: O, H32, H34 and H36 |
| Equipment | 3 slitting lines |
| Lot certification | Mill test report with chemistry and mechanical properties |
Values from Almexa's September 2026 technical data sheet, per Aluminum Association standards. Every quote confirms the exact range for your alloy and temper.
What it is used for
- Profiles and trim on roll formers
- Blinds, gutters and flashing
- Progressive-die stamping of small parts
- Electrical components, in alloy 1350
Industries that use it: Automotive and transportation, Construction, Service centers and re-rollers.
Application guides: Heat shields, Roofing and gutters.
What we need to quote
- Final width and tolerance
- Thickness
- Alloy and temper
- Maximum outside diameter or coil weight your line accepts
- Tons per month
The sales executive confirms the delivery date in the quote, per plant schedule.
Why buy it from the mill
The strip comes from coil we roll ourselves: width, temper and edge quality are controlled in the same plant, without going through a service center.
Planning the slit from mill width reduces edge trim, and that trim goes back to our furnace.
Frequently asked questions
What is the difference between aluminum strip and coil?
It is the same material: strip is coil slit narrow, to the width of your part. You order it when your line can't run the full coil width.
What is the narrowest aluminum strip Almexa makes?
It depends on gauge and alloy. State the final width and gauge in the quote and the sales executive confirms whether it is feasible and at what tolerance.
Buying guides
- Aluminum coil slitting: how slit coil is made, which tolerances to ask for and how to inspect it
- Aluminum coil widths: how to get your final width from 36 or 48 in
- Aluminum temper designations: O, H14 vs H24, H32 and which to order
- What aluminum alloy numbers mean (1100, 3003, 3105, 5052)
- How aluminum price is calculated: LME, premium and FAB
Other products from the mill
- Aluminum coil0.0177 to 0.148 in · 6.30 to 48 in · 1000, 3000 and 5000 series
- Aluminum sheet and plateCut to size · 0.0197 to 0.148 in · plate 0.157 to 13 in
- Aluminum circles6.30 to 47.24 in dia. · 0.0220 to 0.148 in · 1000, 3000 and 5000 series
- Aluminum blanksCustom shape · 0.0177 to 0.148 in · 1000, 3000 and 5000 series
- Aluminum hot bandAbout 0.31 in (8 mm) · F temper · 30.7 to 49.2 in · coils up to 6,834 lb
Send final width, gauge and tons per month. We quote from the plant.
Request a quote