Custom aluminum blanks
Flat aluminum pieces cut to the shape your press runs: square, rectangular or the geometry on your drawing. They come from coil made at our plant, with the lot's mill test report.
An aluminum blank is a flat piece cut to a defined shape and size, ready to stamp, draw or form. A circle is one kind of blank; this page covers the other shapes.

Specifications
| Parameter | Range |
|---|---|
| Alloys | 1050, 1100, 3003, 3004, 3104, 3105; 5005, 5052, 5754 |
| Thickness | Within the coil range: 0.0177 to 0.148 in (0.45 to 3.76 mm) |
| Maximum size | Up to 48 in (1,219 mm) in the 1000 and 3000 series; 36 in (914 mm) in the 5000 series |
| Geometry | Square, rectangular or to drawing |
| Tempers | 1000 series: O, H12, H14, H16 and H18; 3003 and 3105: O, H1X and H2X; 3004 and 5000 series: O, H32, H34 and H36 |
| Equipment | 10 stamping presses and cutting lines at the plant |
| Lot certification | Mill test report with chemistry and mechanical properties |
Values from Almexa's September 2026 technical data sheet, per Aluminum Association standards. Every quote confirms the exact range for your alloy and temper.
What it is used for
- Stamping of automotive and industrial parts
- Drawing of non-round parts: trays, molds and housings
- Identification plates and license plates
- Lighting fixture and appliance components
Industries that use it: Automotive and transportation, Cookware.
Application guides: Trays and molds, Heat shields.
What we need to quote
- Drawing or dimensions of the part
- Alloy and temper, or the process that follows
- Thickness and tolerance
- Pieces per month
- Packaging and delivery format
The sales executive confirms the delivery date in the quote, per plant schedule.
Why buy them from the mill
Cutting the blank where the coil is made removes a middleman and a layer of scrap: yield is planned from mill width, and the offcuts go back to our furnace.
The coil's mill test report travels with every lot of blanks, so your quality team keeps full traceability.
Frequently asked questions
What is the difference between an aluminum blank and a circle?
A circle is a round blank. A blank is any flat piece cut to the shape of the part: square, rectangular or another geometry. Almexa makes both from its own coil.
What do I need to quote aluminum blanks?
The drawing or dimensions of the part, the alloy and temper (or the process that follows), the gauge and the pieces per month. With that, the sales executive confirms tolerances and delivery date.
Buying guides
- Aluminum blanks: when to buy cut-to-size blanks instead of coil or sheet, and how to specify them
- Which aluminum alloy to use for deep drawing pots and pans
- Aluminum sheet gauge chart: inches, millimeters and how it differs from steel gauge
- How aluminum price is calculated: LME, premium and FAB
- How long an aluminum order takes from Mexico and what delays it
Other products from the mill
- Aluminum coil0.0177 to 0.148 in · 6.30 to 48 in · 1000, 3000 and 5000 series
- Aluminum sheet and plateCut to size · 0.0197 to 0.148 in · plate 0.157 to 13 in
- Aluminum circles6.30 to 47.24 in dia. · 0.0220 to 0.148 in · 1000, 3000 and 5000 series
- Aluminum stripNarrow coil to your width · 0.0177 to 0.148 in · 1000, 3000 and 5000 series
- Aluminum hot bandAbout 0.31 in (8 mm) · F temper · 30.7 to 49.2 in · coils up to 6,834 lb
Send your drawing, gauge and pieces per month. We quote from the plant.
Request a quote